ALFATER XL® A70I 4FC0010
TPV(热塑性硫化弹性体)
摩康(原爱彼思ALBIS)(MOCOM)
产品描述
Base Polymer
Thermoplastic Vulcanisate (PP+EPDM)
Colour
natural color, bright inherent color
Service Temperature
max. range (depending on load, geometry, etc.) -40-125 °C
Special Features
food contact, compliant EN 71-3, good colorability, good weathering resistance, good chemical resistance, good ozone reistance, good hot air resistance, good hydrolysis resistant, easy flow
Market Segment
packaging, household goods, food processing industry, toys
Application Area
injection moulded parts
Typical Applications
seals, sealing lip, handles, soft touch elements, protection caps, caps / closures, containers, kitchen ware, 2K components
Adhesion to
Polypropylene Homopolymer, Polypropylene Copolymer, Polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, Thermoplastic Elastomer general
基本信息
| 原厂资料 | ||||
| 产品特性 | 耐热颜色稳定/易着色食品接触级耐候性耐臭氧耐化学性耐水解良好流动性 | |||
| 法规认证 | EN 71(欧盟玩具) | |||
| 颜色形状 | 粒状本色 | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.93 g/cm³ | ISO 1183 | |
收缩率 | |||
纵向(Flow) | 1.3~1.7 % | ISO 294-4 | 24hr |
横向(Across Flow) | 0.9~1.3 % | ISO 294-4 | 24hr |
螺旋流 | 750 mm | - | 2.00 mm |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
100%延伸率时 | 2.7 Mpa | ISO 37 | Type 2 |
- | 5.4 Mpa | ISO 37 | Type 2 |
拉伸延伸率 | |||
断裂(brk) | 480 % | ISO 37 | Type 2 |
撕裂强度 | 27 kN/m | ISO 34 | Method Ba |
压缩永久形变 | 56 % | ISO 815 | 100°C, 22 hr, Type A, 25% |
压缩永久形变 | 72 % | ISO 815 | 125°C, 72 hr, Type A, 25% |
压缩永久形变 | 30 % | ISO 815 | 22°C, 72 hr, Type A, 25% |
压缩永久形变 | 48 % | ISO 815 | 70°C, 22 hr, Type A, 25% |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 A | 70 A | ISO 868 | 15 sec |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
加工温度 | 190~220 °C | - | |
模具温度 | 10~60 °C | - |