OnFlex™ S EH 80A-3S7005
TPE(TPR)
埃万特(原普立万)(Avient)
产品描述
OnFlex™ S EH thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver a great cost/performance ratio in addition to typical OnFlex™ S properties such as a wide hardness range, good mechanical properties, good processability, good colourability and a wide temperature operating range. OnFlex™ S EH compounds are filled, and are therefore opaque and have a moderately high density.
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 抗紫外线 | |||
| 法规认证 | RoHS(欧盟电子电气设备中有害物质) | |||
| 颜色形状 | 粒状 | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 1.2 g/cm³ | ISO 1183 | |
磨耗 | 311 mm³ | DIN 53516 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
断裂(brk) | 7 Mpa | ISO 37 | |
100%延伸率时 | 3.5 Mpa | ISO 37 | |
300%延伸率时 | 4.5 Mpa | ISO 37 | |
拉伸延伸率 | |||
断裂(brk) | 500 % | ISO 37 | |
撕裂强度 | 33 kN/m | ISO 34 | |
压缩永久形变 | 88 % | ISO 815 | 100°C, 22 hr |
压缩永久形变 | 39 % | ISO 815 | 23°C, 72 hr |
压缩永久形变 | 70 % | ISO 815 | 70°C, 22 hr |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 A | 80 A | ISO 868 | |
| 燃烧性能 | 值/单位 | 测试标准 | 测试条件 |
灼热丝可燃性指数(GWFI) | |||
2mm | 700 °C | IEC 60695-2-12 | |
| 其他性能 | 值/单位 | 测试标准 | 测试条件 |
凝雾实验 | |||
G值（凝聚物） | 1.5 mg | DIN 75201 | 100°C |
气味测试 | 2.5 class | VDA 270 |