OnFlex™ S KE 70A-3E1726 SO10
OnFlex™ S KE 70A-3E1726 SO10
TPE(TPR)
埃万特(原普立万)(Avient)
产品描述
OnFlex™-S KE thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially compatabilized to provide excellent adhesion to a variety polar substrates including PC, ABS, PC/ABS, ASA and PVC. OnFlex-S KE compounds can be processed by 2K molding or overmoulding, insert moulding or co-extrusion. In addition to this OnFlex-S KE compounds are formulated to provide good compression set performance, even at elevated temperatures, good processability, a wide hardness range, low temperature flexibility, good scratch resistance, good colourability and surface appearance, and excellent mechanical properties. UV protected.
基本信息
原厂资料 | 物性表(英文) |
产品特性 | 耐刮擦良好粘合性易脱模抗紫外线 |
法规认证 | RoHS(欧盟电子电气设备中有害物质) |
颜色形状 | 粒状黑色 |
成型方式 | 注塑共挤 |
技术参数
物理性能 | 值/单位 | 测试标准 | 测试条件 |
密度 | 1.14 g/cm³
| ISO 1183 | |
机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | | | |
断裂(brk) |
11.3 Mpa | ISO 37 | |
100%延伸率时 |
3 Mpa | ISO 37 | |
300%延伸率时 |
5.8 Mpa | ISO 37 | |
拉伸延伸率 | | | |
断裂(brk) |
500 % | ISO 37 | |
压缩永久形变 | 73 %
| ISO 815 | 100°C, 22 hr |
压缩永久形变 | 29 %
| ISO 815 | 23°C, 72 hr |
压缩永久形变 | 50 %
| ISO 815 | 70°C, 22 hr |
硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 A | 70 A
| ISO 868 | |