OnFlex™ S HS 70A-3E2543
TPE(TPR)
埃万特(原普立万)(Avient)
产品描述
This OnFlex™-S HS thermoplastic elastomer compounds is based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver high strength and medium-low density in addition to typical OnFlex™-S properties such as a wide hardness range, good mechanical properties, good processability, good colourability and a wide temperature operating range.
基本信息
原厂资料 | 物性表(英文) | |||
产品特性 | 高强度 | |||
法规认证 | RoHS(欧盟电子电气设备中有害物质) | |||
颜色形状 | 粒状 | |||
成型方式 | 注塑管材挤出 |
技术参数
物理性能 | 值/单位 | 测试标准 | 测试条件 |
---|---|---|---|
密度 | 1 g/cm³ | ISO 1183 | |
机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
断裂(brk) | 11.1 Mpa | ISO 37 | Across Flow : 2.00 mm, Injection molded |
断裂(brk) | 10.9 Mpa | ISO 37 | Flow : 2.00 mm, Extruded |
断裂(brk) | 7.2 Mpa | ISO 37 | Flow : 2.00 mm, Injection molded |
拉伸延伸率 | |||
断裂(brk) | 560 % | ISO 37 | Across Flow : 2.00 mm, Injection molded |
断裂(brk) | 590 % | ISO 37 | Flow : 2.00 mm, Extruded |
断裂(brk) | 420 % | ISO 37 | Flow : 2.00 mm, Injection molded |
硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 A | 70 A | ISO 868 |