LubX® CV
TP热塑性塑料
劳士领(Rochling)
产品描述
LubX® CV is a sliding material especially for systems and machinery used in conveyor technology and automation. The material was developed for systems intended to be operated at higher velocities and pressure loads, meaning increased productivity. Scientific research shows: The material significantly improves system performance and efficiency. Even when used for high-load applications, it retains its excellent sliding characteristics and high wear resistance.
LubX® CV has
-exceptionally good sliding properties
-at the same time exhibits a very low temperature development
-Both results in lower wear and a longer lifespan of the entire system.
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 低摩擦食品接触级 | |||
| 法规认证 | EU Food Contact(2011/10/EC)(欧盟食品级)FDA(食品药品监督管理局) | |||
| 颜色形状 | 板材棒材管材型材部件 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.94 g/cm³ | ISO 1183 | |
吸水率 | 0.01 % | ISO 62 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 19 Mpa | ISO 527 | |
拉伸延伸率 | |||
断裂(brk) | 250 % | ISO 527 | |
拉伸模量 | 800 Mpa | ISO 527 | |
摩擦系数 | 0.13 - | Internal | partner POM (0,5 m/s - 0,5 MPa) |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
- | NB kJ/m² | ISO 179 | |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 D | 60 D | ISO 868 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
线性膨胀系数(CLTE) | |||
- | 150~230 E-6/K | DIN 53752 | |
熔融温度(Tm) | 133~135 °C | ISO 11357-3 | |
连续使用温度 | |||
- | 130 °C | Internal | |
短周期使用温度 | -150~80 °C | - | |
| 燃烧性能 | 值/单位 | 测试标准 | 测试条件 |
UL 防火等级 | |||
HB | 3 mm | UL94 | |
HB | 6 mm | UL94 | |
| 电学性能 | 值/单位 | 测试标准 | 测试条件 |
体积电阻率 | 1.0E+15 Ohm-cm | IEC 62631-3-1 | |
表面电阻率 | 1.0E+14 Ohm | IEC 62631-3-2 |