Formolene® 6502A
PP(聚丙烯)
台塑美国(Formosa Plastics)
产品描述
Impact Copolymer for Extrusion Applications
Formolene® 6502A is a high impact copolymer with an excellent balance of toughness and stiffness. It is suitable for blow-molded bottles and components, heavy gauge sheet for thermoformed containers and components and profile extrusions including corrugated board.
Material has been approved under automotive specification - FCA MS-DB-500 CPN 4809.
Formolene® 6502A meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional information on approved conditions of use for food contact applications, please refer to the “Products” section on our website (http://www.fpcusa.com/ourproducts.html).
This material is free of animal-derived content.
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 高冲击食品接触级共聚物 | |||
| 法规认证 | FDA(食品药品监督管理局) | |||
| 成型方式 | 挤出型材挤出吹塑热成型 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.9 g/cm³ | ASTM D 1505 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 1.5 g/10min | ASTM D 1238 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 26 Mpa | ASTM D638 | 50 mm/min |
拉伸延伸率 | |||
屈服(yld) | 9 % | ASTM D638 | 50 mm/min |
弯曲模量 | 1207 Mpa | ASTM D790 | 1% Secant, 1.3 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
悬臂梁缺口(Izod Notched) | |||
0℃ (32℉) | 91 J/m | ASTM D256 | |
23℃ (73℉) | 854 J/m | ASTM D256 | |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
洛氏硬度R | 95 R | ASTM D785 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 97 °C | ASTM D648 |