SABIC® PP 58MNK10
PP(聚丙烯)
沙特基础 (SABIC)
产品描述
This grade combines an excellent stiffnesswith high impact resistance. It has a low tendency to warp. Excellent flow in combination with high crystallisation speed enables outstanding processability aiming at easy mould filling and short cycle times.
Thanks to the mentioned performance this grade is typically used in several kinds of containers. The excellent gloss level makes this material also favourable for household applications.
Health, Safety and Food Contact regulations:
Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThis product is not intended for and must not be used in any pharmaceutical/medical applications.
This grade material is UL registered under File E111275 (www.ul.com).
IMDS 80775790
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 良好的刚性高冲击低翘曲易成型短周期成型易填模良好流动性共聚物 | |||
| 添加助剂 | 成核剂 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.905 g/cm³ | ASTM D 1505 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 15 g/10min | ISO 1133 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 27 Mpa | ISO 527-2 | |
拉伸延伸率 | |||
屈服(yld) | 4 % | ISO 527-2 | 50 mm/min |
拉伸模量 | 1550 Mpa | ISO 527-2 | 1 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
-20℃ (-4℉) | 6 kJ/m² | ISO 179/1eA | |
0℃ (32℉) | 8 kJ/m² | ISO 179/1eA | |
23℃ (73℉) | 12.5 kJ/m² | ISO 179/1eA | |
悬臂梁缺口(Izod Notched) | |||
-20℃ (-4℉) | 6 kJ/m² | ISO 180/1A | |
0℃ (32℉) | 7 kJ/m² | ISO 180/1A | |
23℃ (73℉) | 11 kJ/m² | ISO 180/1A | |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 D | 65 D | ISO 868 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 100 °C | ISO 75 | 80*10*4mm |
1.8 Mpa (264 psi)（18.6kg/cm²） | 60 °C | ISO 75 | 80*10*4mm |
维卡软化温度(Vicat) | 80 °C | ISO 306/B | 120°C/h, at 50 N (VST/B) |
维卡软化温度(Vicat) | 151 °C | ISO 306/A | 120°C/h, at 10 N (VST/A) |