Formolene® 4100T
PP(聚丙烯)
台塑美国(Formosa Plastics)
产品描述
Homopolymer for General Purpose Injection Molding
Formolene® 4100T is a homopolymer polypropylene designed for various general purpose injection molded applications such as closures, small appliances, housewares and toys. It contains a unique combination of stabilizers, which provides excellent processability with good stiffness, environmental stress crack resistance, heat performance and minimal odor & taste.
Formolene® 4100T meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional information on approved conditions of use for food contact applications, please refer to the “Products” section on our web site (http://www.fpcusa.com/ourproducts.html).
This material is free of animal-derived content.
基本信息
| 原厂资料 | 物性表-ISO(英文) 物性表-ASTM(英文) | |||
| 产品特性 | 良好的刚性易成型低气味食品接触级ESCR均聚物 | |||
| 添加助剂 | 加工助剂 | |||
| 法规认证 | FDA(食品药品监督管理局) | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.9 g/cm³ | ISO 1183 | |
密度 | 0.9 g/cm³ | ASTM D 1505 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 35 g/10min | ASTM D 1238 | |
230°C/2.16 kg | 35 g/10min | ISO 1133 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 34 Mpa | ASTM D638 | 50 mm/min |
屈服(yld) | 35 Mpa | ISO 527 | 50 mm/min |
拉伸延伸率 | |||
屈服(yld) | 8 % | ASTM D638 | 50 mm/min |
屈服(yld) | 9 % | ISO 527 | 50 mm/min |
弯曲模量 | 1241 Mpa | ASTM D790 | 1% Secant, 1.3 mm/min |
弯曲模量 | 1510 Mpa | ISO 178 | 1% Secant, 1.3 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
23℃ (73℉) | 2.1 kJ/m² | ISO 179 | |
悬臂梁缺口(Izod Notched) | |||
23℃ (73℉) | 21 J/m | ASTM D256 | |
23℃ (73℉) | 2.2 kJ/m² | ISO 180 | |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
洛氏硬度R | 105 R | ASTM D785 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 88 °C | ISO 75 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | 52 °C | ISO 75 |