Daplen™ ED113AE
PP(聚丙烯)
博禄/北欧化工(Borealis AG/Borouge)
产品描述
Daplen™ ED113AE is a 15% mineral filled polypropylene compound intended for injection moulding. This material provides excellent paintability, very good impact/stiffness balance and it is easy to process.
Applications
Daplen ED113AE has been developed especially for the automotive industry and is suitable for applications like: Bumpers Automotive exterior applications Rocker panels
Special Features
Very good processability High level of surface aspects, meeting the more stringent paint adhesion requirements Low density with good impact/stiffness balance enabling weight reduction Primerless paintable allowing optimisation of painting cycle time and reduction of system costs Low thermal expansion over a broad temperature scale for zero-gap applications
基本信息
原厂资料 | 物性表-ISO(英文) 汽车用料各牌号技术参数汇总(英文) | |||
产品特性 | 良好的刚性良好冲击性良好表面低线性膨胀易成型易涂装填充增强 | |||
成型方式 | 注塑 | |||
增强填充 | 15% 矿物 |
技术参数
物理性能 | 值/单位 | 测试标准 | 测试条件 |
---|---|---|---|
密度 | 1 g/cm³ | ISO 1183 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 8.5 g/10min | ISO 1133 | |
机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
- | 17 Mpa | ISO 527 | 50 mm/min |
弯曲模量 | 1830 Mpa | ISO 178 | 2 mm/min |
拉伸模量 | 1700 Mpa | ISO 527 | 1 mm/min |
冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
-20℃ (-4℉) | 5 kJ/m² | ISO 179/1eA | |
23℃ (73℉) | 35 kJ/m² | ISO 179/1eA | |
热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)(4.6kg/cm²) | 102 °C | ISO 75 | |
线性膨胀系数(CLTE) | |||
- | 66 E-6/K | Internal | -30-80 °C |