Daplen™ WN100AIU
PP(聚丙烯)
博禄/北欧化工(Borealis AG/Borouge)
产品描述
Daplen WN100AIU is a 10% mineral filled polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness and gives a good surface quality.
Applications
Daplen WN100AIU has been developed especially for the car industry to be used in automotive interior parts. Dashboards Pillar trims Door panels and pockets Tailgates Other automotive interior parts
Special Features
Excellent scratch resistance Low gloss High purity Excellent surface appearance
基本信息
| 原厂资料 | 物性表-ISO(英文) | |||
| 产品特性 | 良好的刚性良好冲击性良好表面低光泽耐刮擦填充增强 | |||
| 成型方式 | 注塑 | |||
| 增强填充 | 10% 矿物 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.94 g/cm³ | ISO 1183 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 19 g/10min | ISO 1133 | |
收缩率 | |||
- | 1.2 % | Internal | Mould average Shrinkage |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
- | 20 Mpa | ISO 527-2 | 50 mm/min |
弯曲模量 | 1650 Mpa | ISO 178 | 2 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
-20℃ (-4℉) | 6 kJ/m² | ISO 179/1eA | |
23℃ (73℉) | 35 kJ/m² | ISO 179/1eA | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 100 °C | ISO 75-2 | |
| 其他性能 | 值/单位 | 测试标准 | 测试条件 |
凝雾实验 | |||
- | 2 mg | DIN 75201 | 100 °C,16 h |
VOC挥发 | 50 µgC/g | VDA 277 |