Bormed™ RF825MO
PP(聚丙烯)
博禄/北欧化工(Borealis AG/Borouge)
产品描述
Bormed RF825MO is a polypropylene random copolymer intended for evaluation for use in Healthcare applications.
This high melt flow grade is modified with a nucleating agent resulting in a fast crystallisation, which gives possibilities for a fast cycle-time. Products produced from Bormed RF825MO are characterised with a very high transparency, high gloss and a good stiffness-impact balance. Material can be sterilised with ethylene oxide and steam.
CAS-No. 9010-79-1
Applications
Bormed RF825MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical and Diagnostic devices or Pharmaceutical packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RF825MO .
Needle hubs Blood collection systems Catheter connections Disposable non pre-filled syringes Laboratory disposable Diagnostic disposable
The customer should be aware that Bormed products may only be used in applications which are pre-approved for evaluation by Borealis received in the form of a risk assessment form (RAF) review response. Without such preapproval, no use of the grade shall be made. In case of doubt, the customer should seek pre-approval for evaluation from Borealis to proceed through their Sales or technical contact. Borealis makes no warranties beyond what is contained in this product datasheet and the customer is responsible for reading and accepting the disclaimer as contained in this product datasheet.
Special Features
Easy processability Excellent transparency Good printability
基本信息
| 原厂资料 | 物性表-ISO(英文) | |||
| 产品特性 | 透光高光泽易成型短周期成型印刷/标记医疗级环氧乙烷灭菌(EtO)耐蒸煮高流动 | |||
| 添加助剂 | 成核剂 | |||
| 颜色形状 | 透明 | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 20 g/10min | ISO 1133 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 28 Mpa | ISO 527-2 | 50 mm/min |
拉伸延伸率 | |||
屈服(yld) | 12 % | ISO 527-2 | 50 mm/min |
弯曲模量 | 1100 Mpa | ISO 178 | |
拉伸模量 | 1150 Mpa | ISO 527-2 | 1 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
23℃ (73℉) | 6 kJ/m² | ISO 179/1eA | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 75 °C | ISO 75-2 | |
熔融温度(Tm) | 150 °C | ISO 11357-3 | DSC |