Formolene® 6610A
PP(聚丙烯)
台塑美国(Formosa Plastics)
产品描述
Impact Copolymer for Compounding and Injection Molded Applications
Formolene® 6610A is a high impact copolymer of polypropylene designed for such injection applications as automotive compounding, lawn & garden products and appliances. It is characterized by an excellent physical property balance of stiffness and impact at room temperature and sub-ambient conditions as well as finished product dimensional stability. It contains a unique combination of stabilizers, which provide excellent processing and usage performance.
Formolene® 6610A meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional information on approved conditions of use for food contact applications, please refer to the “Products” section on our website (http://www.fpcusa.com/ourproducts.html).
This material is free of animal-derived content.
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 高冲击尺寸稳定易成型食品接触级共聚物 | |||
| 添加助剂 | 加工助剂 | |||
| 法规认证 | FDA(食品药品监督管理局) | |||
| 成型方式 | 注塑共混改性 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.9 g/cm³ | ASTM D 1505 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 10 g/10min | ASTM D 1238 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 22 Mpa | ASTM D638 | 50 mm/min |
拉伸延伸率 | |||
屈服(yld) | 6 % | ASTM D638 | 50 mm/min |
弯曲模量 | 1000 Mpa | ASTM D790 | 1% Secant, 1.3 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
悬臂梁缺口(Izod Notched) | |||
-30℃ (-22℉) | 80 J/m | ASTM D256 | |
0℃ (32℉) | 91 J/m | ASTM D256 | |
23℃ (73℉) | 587 J/m | ASTM D256 | |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
洛氏硬度R | 110 R | ASTM D785 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 95 °C | ASTM D648 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | 50 °C | ASTM D648 |