SABIC® PP 512MN10
PP(聚丙烯)
沙特基础 (SABIC)
产品描述
SABIC PP 512MN10 has excellent flow properties and a good combination of high impact strength and stiffness. It is widely used in articles where good processability, high toughness and a low warpage are required, e.g. vacuum-cleaner housings, large size flower pots, foodstuff containers and ice-cream containers.
Health, Safety and Food Contact regulations:
Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.
This grade material is UL registered under File E111275 (www.ul.com)
IMDS 80775790
基本信息
原厂资料 | 物性表(英文) | |||
产品特性 | 高强度高冲击低翘曲易成型食品接触级良好流动性共聚物 |
技术参数
物理性能 | 值/单位 | 测试标准 | 测试条件 |
---|---|---|---|
密度 | 0.905 g/cm³ | ASTM D 1505 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 37 g/10min | ISO 1133 | |
机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 25 Mpa | ISO 527-2 | |
拉伸延伸率 | |||
屈服(yld) | 5 % | ISO 527-2 | 50 mm/min |
拉伸模量 | 1300 Mpa | ISO 527-2 | 1 mm/min |
冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
-20℃ (-4℉) | 5 kJ/m² | ISO 179/1eA | |
0℃ (32℉) | 7 kJ/m² | ISO 179/1eA | |
23℃ (73℉) | 11 kJ/m² | ISO 179/1eA | |
悬臂梁缺口(Izod Notched) | |||
-20℃ (-4℉) | 5 kJ/m² | ISO 180/1A | |
0℃ (32℉) | 6.5 kJ/m² | ISO 180/1A | |
23℃ (73℉) | 8 kJ/m² | ISO 180/1A | |
硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 D | 63 D | ISO 868 | |
热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)(4.6kg/cm²) | 85 °C | ISO 75 | 80*10*4mm |
1.8 Mpa (264 psi)(18.6kg/cm²) | 55 °C | ISO 75 | 80*10*4mm |
维卡软化温度(Vicat) | 75 °C | ISO 306/B | 120°C/h, at 50 N (VST/B) |
维卡软化温度(Vicat) | 150 °C | ISO 306/A | 120°C/h, at 10 N (VST/A) |