Formolene® 3310Z
PP(聚丙烯)
台塑美国(Formosa Plastics)
产品描述
Random Copolymer for Extrusion Applications
Formolene® 3310Z is a medium flow, random copolymer polypropylene designed for extrusion applications. It is a barefoot resin with a stabilization package formulated without animal derivative material (ADM). Potential applications include cast film and other uses which require good clarity and gel free content.
Formolene® 3310Z meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional information on approved conditions of use for food contact applications, please refer to the “Products” section on our website (http://www.fpcusa.com/ourproducts.html).
基本信息
| 原厂资料 | 物性表(英文) | |||
| 法规认证 | FDA(食品药品监督管理局) | |||
| 成型方式 | 流延薄膜挤出 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.9 g/cm³ | ASTM D 1505 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 10 g/10min | ASTM D 1238 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 28 Mpa | ASTM D638 | 50 mm/min |
拉伸延伸率 | |||
屈服(yld) | 15 % | ASTM D638 | 50 mm/min |
弯曲模量 | 896 Mpa | ASTM D790 | 1% Secant, 1.3 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
悬臂梁缺口(Izod Notched) | |||
23℃ (73℉) | 80 J/m | ASTM D256 | |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
洛氏硬度R | 96 R | ASTM D785 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 90 °C | ASTM D648 | |
| 光学性能 | 值/单位 | 测试标准 | 测试条件 |
雾度 | 1 % | Internal | 0.5 mil thickness |