Hifax TRC 221X
PP(聚丙烯)
利安德巴塞尔(LyondellBasell)
产品描述
Hifax TRC 221X is a new high melt flow, 20% mineral filled polypropylene copolymer for injection moulding. It combines a very high flowability with an excellent impact/stiffness balance and very low CLTE. The grade has been specifically designed for moulding of large complex parts that require high impact strength as well as good stiffness.This grade is available in custom colour, pellet form. it contains no UV stabiliser therefore it should be used only for fully painted parts
基本信息
| 原厂资料 | 物性表-ISO(英文) | |||
| 产品特性 | 良好的刚性良好冲击性低线性膨胀易涂装高流动共聚物填充增强 | |||
| 成型方式 | 注塑 | |||
| 增强填充 | 20% 矿物 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 1.04 g/cm³ | ISO 1183 | Method A |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 16 g/10min | ISO 1133 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 17 Mpa | ISO 527-1/-2 | |
弯曲模量 | 1500 Mpa | ISO 178 | |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
悬臂梁缺口(Izod Notched) | |||
-40℃ (-40℉) | 5 kJ/m² | ISO 180 | Type 1, Notch A |
23℃ (73℉) | NB kJ/m² | ISO 180 | Type 1, Notch A |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 100 °C | ISO 75-1/-2 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | 50 °C | ISO 75-1/-2 | Unannealed |