Bormed™ SB815MO

Bormed SB815MO is a polypropylene random-heterophasic copolymer intended for evaluation for use in  Healthcare applications. 

This grade is designed for production of bottles & ampoules for use in Pharmaceutical & Diagnostic applications  manufactured via BFS, Extrusion or Injection blow moulding technologies. Final articles can be steam sterilised at  121 °C and are characterised by flexibility, allowing a good collapsibility and good optical properties. Haze of 0,5  mm and 1 mm injection moulded plaques is approximately 10 % and 28 % respectively. 

CAS-No. 9010-79-1 

Applications 

Bormed SB815MO has been evaluated according to different regulations and norms. Typical applications are  mentioned below for Medical and Diagnostic devices or Pharmaceutical packaging. However, Borealis should be  consulted for final approval to evaluate the use of Bormed SB815MO . 

    Bottles for IV-solutions Bottles for irrigation solutions Ampoules for injectable solutions  

The customer should be aware that Bormed products may only be used in applications which are pre-approved for  evaluation by Borealis received in the form of a risk assessment form (RAF) review response. Without such preapproval, no use of the grade shall be made. In case of doubt, the customer should seek pre-approval for  evaluation from Borealis to proceed through their Sales or technical contact. Borealis makes no warranties beyond  what is contained in this product datasheet and the customer is responsible for reading and accepting the  disclaimer as contained in this product datasheet. 

Special Features 

Good transparency Sterilisable Good flexibility