Bormed™ RF830MO
PP(聚丙烯)
博禄/北欧化工(Borealis AG/Borouge)
产品描述
Bormed RF830MO is a polypropylene random copolymer intended for evaluation for use in Healthcare applications.
This transparent grade is modified with a nucleating agent and is suitable for articles, which need post sterilisation with radiation. Bormed RF830MO is characterised by easy processability, high transparency, high gloss and a good stiffness-impact balance. Products moulded from this grade and radiated with the dose of 25 kGy have a shelf-life of 5 years, if properly stored. Material can also be sterilised with ethylene oxide and steam.
CAS-No. 9010-79-1
Applications
Bormed RF830MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical and Diagnostic devices or Pharmaceutical packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RF830MO .
Disposable non pre-filled syringes Needle hubs Catheter connections Laboratory disposable Diagnostic products Blood collection tubes
The customer should be aware that Bormed products may only be used in applications which are pre-approved for evaluation by Borealis received in the form of a risk assessment form (RAF) review response. Without such preapproval, no use of the grade shall be made. In case of doubt, the customer should seek pre-approval for evaluation from Borealis to proceed through their Sales or technical contact. Borealis makes no warranties beyond what is contained in this product datasheet and the customer is responsible for reading and accepting the disclaimer as contained in this product datasheet.
Special Features
Radiation resistance High transparency Easy processing
基本信息
| 原厂资料 | 物性表-ISO(英文) | |||
| 产品特性 | 良好的刚性良好冲击性透光高光泽易成型医疗级耐伽马射线环氧乙烷灭菌(EtO)耐蒸煮 | |||
| 添加助剂 | 成核剂 | |||
| 颜色形状 | 透明 | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 20 g/10min | ISO 1133 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 28 Mpa | ISO 527-2 | 50 mm/min |
拉伸延伸率 | |||
屈服(yld) | 12 % | ISO 527-2 | 50 mm/min |
弯曲模量 | 1100 Mpa | ISO 178 | |
拉伸模量 | 1150 Mpa | ISO 527-2 | 1 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
23℃ (73℉) | 5 kJ/m² | ISO 179/1eA | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 75 °C | ISO 75-2 | |
熔融温度(Tm) | 150 °C | ISO 11357-3 | DSC |
原材料现货供应:133-8218-6680(微信同号)