Formolene® 4143T
PP(聚丙烯)
台塑美国(Formosa Plastics)
产品描述
Homopolymer for Injection Molded Applications
Formolene® 4143T is a polypropylene homopolymer with fast cycle time and easy mold release. It has use in injection molded applications including appliances, closures and thin wall programs. It contains nucleation and antistat which provides excellent processability and good end use performance. It has increased mold release for good handling of components.
Formolene® 4143T meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional information on approved conditions of use for food contact applications, please refer to the “Products” section on our website (http://www.fpcusa.com/ourproducts.html).
This material is free of animal-derived content.
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 抗静电 ESD易成型短周期成型易脱模均聚物成核的 | |||
| 添加助剂 | 抗静电剂成核剂加工助剂 | |||
| 法规认证 | FDA(食品药品监督管理局) | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.9 g/cm³ | ASTM D 1505 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 35 g/10min | ASTM D 1238 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 39 Mpa | ASTM D638 | 50 mm/min |
拉伸延伸率 | |||
屈服(yld) | 7 % | ASTM D638 | 50 mm/min |
弯曲模量 | 1793 Mpa | ASTM D790 | 1% Secant, 1.3 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
悬臂梁缺口(Izod Notched) | |||
23℃ (73℉) | 27 J/m | ASTM D256 | |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
洛氏硬度R | 105 R | ASTM D785 |
原材料现货供应:133-8218-6680(微信同号)