SABIC® PP 511MK46
PP(聚丙烯)
沙特基础 (SABIC)
产品描述
SABIC PP 511MK46 is specially developed for producing injection molded articles. This grade contains nucleating & antistatic agents. It has mediumhigh flow properties in combination with excellent impact / stiffness balance and excellent organoleptic properties.
SABIC PP 511MK46 encompasses the following features: excellent top load strength & down gauging potential; excellent impact resistance; excellent isotropic shrinkage performance (dimensional stability); high crystallization temperature and excellent flow behavior (lower cycle time); clean product in combination of low / no odor & taste.
TYPICAL APPLICATIONS
SABIC® PP 511MK46 can be used for appliances, housewares, pails & containers and thin wall containers.
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 良好的刚性良好冲击性尺寸稳定短周期成型低挥发VOC低气味高流动共聚物各向同性 | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.903 g/cm³ | ASTM D792 | 23°C |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 30 g/10min | ASTM D 1238 | |
收缩率 | |||
- | 1.2~2 % | Internal | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 26 Mpa | ASTM D638 | |
拉伸延伸率 | |||
屈服(yld) | 5 % | ASTM D638 | |
弯曲模量 | 1160 Mpa | ASTM D790 A | 1% Secant |
弯曲模量 | 1310 Mpa | ASTM D790 B | 1% Secant |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
悬臂梁缺口(Izod Notched) | |||
-20℃ (-4℉) | 50 J/m | ASTM D256 | |
23℃ (73℉) | 90 J/m | ASTM D256 | |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
洛氏硬度R | 98 R | ASTM D785 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 110 °C | ASTM D648 | |
维卡软化温度(Vicat) | 149 °C | ASTM D1525 | |
加工温度 | 200~245 °C | - | |
模具温度 | 15~65 °C | - |
原材料现货供应:133-8218-6680(微信同号)