SABIC® PP 83MF10
PP(聚丙烯)
沙特基础 (SABIC)
产品描述
This grade combines a very high impact strength, even at low temperatures, with a high stiffness and moderate flow properties.
It is typically used by our customers for injection moulding of technical components and containers exposed to heavy loads and needing a high toughness.
It is typically used by our customers for extrusion applications like thin sheet, corrugated board and profiles.
Health, Safety and Food Contact regulations: Safety Data Sheets (SDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical / medical applications.
This grade material is UL registered under File E111275 (www.ul.com).
IMDS ID: 80775790
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 高刚性高冲击耐低温冲击共聚物 | |||
| 成型方式 | 注塑挤出 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.905 g/cm³ | ASTM D 1505 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 1.8 g/10min | ISO 1133 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 23 Mpa | ISO 527-2 | |
拉伸延伸率 | |||
屈服(yld) | 5 % | ISO 527-2 | 50 mm/min |
拉伸模量 | 1200 Mpa | ISO 527-2 | 1 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
-20℃ (-4℉) | 10 kJ/m² | ISO 179/1eA | |
0℃ (32℉) | 40 kJ/m² | ISO 179/1eA | |
23℃ (73℉) | 75 kJ/m² | ISO 179/1eA | |
简支梁无缺口(Charpy Unnotched) | |||
23℃ (73℉) | NB kJ/m² | ISO 179/1eU | |
悬臂梁缺口(Izod Notched) | |||
-20℃ (-4℉) | 12 kJ/m² | ISO 180/1A | |
23℃ (73℉) | NB kJ/m² | ISO 180/1A | |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 D | 61 D | ISO 868 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 85 °C | ISO 75 | 80*10*4mm |
1.8 Mpa (264 psi)（18.6kg/cm²） | 55 °C | ISO 75 | 80*10*4mm |
维卡软化温度(Vicat) | 68 °C | ISO 306/B | 120°C/h, at 50 N (VST/B) |
维卡软化温度(Vicat) | 148 °C | ISO 306/A | 120°C/h, at 10 N (VST/A) |
原材料现货供应:133-8218-6680(微信同号)