Bormed™ BE860MO
PP(聚丙烯)
博禄/北欧化工(Borealis AG/Borouge)
产品描述
Bormed BE860MO is a resin intended for evaluation for use in Healthcare applications.
Bormed™ BE860MO is a heterophasic copolymer.
This grade is characterized by an easy flow and excellent impact strength even at negative temperatures.
CAS-No. 9010-79-1
Applications
Bormed BE860MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed BE860MO .
Bottles and containers for tablets Bottles and containers for powder Bottles and containers for granules Caps and closures Connectors for tubing
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special Features
Good impact strength at low temperature Good flow behaviour
基本信息
| 原厂资料 | 物性表-ISO(英文) | |||
| 产品特性 | 耐低温冲击医疗级良好流动性 | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.902 g/cm³ | ISO 1183 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 13 g/10min | ISO 1133 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 25 Mpa | ISO 527-2 | 50 mm/min |
拉伸延伸率 | |||
屈服(yld) | 6 % | ISO 527-2 | 50 mm/min |
弯曲模量 | 1400 Mpa | ISO 178 | |
拉伸模量 | 1250 Mpa | ISO 527-2 | 1 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
-20℃ (-4℉) | 4 kJ/m² | ISO 179/1eA | |
23℃ (73℉) | 8 kJ/m² | ISO 179/1eA | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 85 °C | ISO 75-2 |
原材料现货供应:133-8218-6680(微信同号)