Formolene® 3380E
PP(聚丙烯)
台塑美国(Formosa Plastics)
产品描述
Random Copolymer for Clear Storage and Food and Beverage Containers
Formolene® 3380E is a very high melt flow random copolymer with fast cycle time and easy processability. It is designed for injection molding including thin wall applications requiring good mold and part release. The use of an advanced clarifier which provides the aesthetic values of neutral color and low haze – makes it an excellent choice for ‘see-through’ house wares and rigid packaging.
Formolene® 3380E meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional information on approved conditions of use for food contact applications, please refer to the “Products” section on our website (http://www.fpcusa.com/ourproducts.html).
This material is free of animal-derived content.
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 易成型短周期成型易脱模食品接触级高流动 | |||
| 法规认证 | FDA(食品药品监督管理局) | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.9 g/cm³ | ASTM D 1505 | |
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 80 g/10min | ASTM D 1238 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 29 Mpa | ASTM D638 | 50 mm/min |
拉伸延伸率 | |||
屈服(yld) | 14 % | ASTM D638 | 50 mm/min |
弯曲模量 | 1103 Mpa | ASTM D790 | 1% Secant, 1.3 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
悬臂梁缺口(Izod Notched) | |||
23℃ (73℉) | 59 J/m | ASTM D256 | |
落锤冲击 | 21 J | ASTM D 5420 | Gardner Impact @73°F |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 81 °C | ASTM D648 | |
| 光学性能 | 值/单位 | 测试标准 | 测试条件 |
雾度 | 10 % | Internal | 1 mm |
原材料现货供应:133-8218-6680(微信同号)