Bormed™ HF840MO
PP(聚丙烯)
博禄/北欧化工(Borealis AG/Borouge)
产品描述
Bormed HF840MO is a polypropylene homopolymer intended for evaluation for use in Healthcare applications. This grade is modified with a slip agent and typically used in injection moulding. It is characterised by a good processability and an easy de-moulding. Products produced from Bormed HF840MO are characterised by a controlled low friction, good physical properties and low warpage because of the narrow molecular distribution.
Bormed HF840MO can be sterilised with ethylene oxide or steam.
CAS-No. 9003-07-0
Applications
Bormed HF840MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical and Diagnostic devices or Pharmaceutical packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HF840MO .
Disposable syringe barrels Needle cover Catheter connections Aerosol valves Closures
The customer should be aware that Bormed products may only be used in applications which are pre-approved for evaluation by Borealis received in the form of a risk assessment form (RAF) review response. Without such preapproval, no use of the grade shall be made. In case of doubt, the customer should seek pre-approval for evaluation from Borealis to proceed through their Sales or technical contact. Borealis makes no warranties beyond what is contained in this product datasheet and the customer is responsible for reading and accepting the disclaimer as contained in this product datasheet.
Special Features
Easy processing Low friction
基本信息
| 原厂资料 | 物性表-ISO(英文) | |||
| 产品特性 | 低摩擦低翘曲易成型易脱模医疗级环氧乙烷灭菌(EtO)耐蒸煮均聚物 | |||
| 添加助剂 | 增滑剂 | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 19 g/10min | ISO 1133 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 29.5 Mpa | ISO 527-2 | 50 mm/min |
拉伸延伸率 | |||
屈服(yld) | 11 % | ISO 527-2 | 50 mm/min |
弯曲模量 | 1250 Mpa | ISO 178 | |
拉伸模量 | 1250 Mpa | ISO 527-2 | 1 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
23℃ (73℉) | 3 kJ/m² | ISO 179/1eA | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 85 °C | ISO 75-2 | |
熔融温度(Tm) | 160 °C | ISO 11357-3 | DSC |
原材料现货供应:133-8218-6680(微信同号)