Bormed™ RE816CF
PP(聚丙烯)
博禄/北欧化工(Borealis AG/Borouge)
产品描述
Bormed RE816CF is a polypropylene random copolymer intended for evaluation for use in Healthcare applications.
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
CAS-No. 9010-79-1
Applications
Bormed RE816CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical and Diagnostic devices or Pharmaceutical packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RE816CF .
Medical device packaging Pouches for Continuous Ambulatory Peritoneal Dialysis Parenteral nutrition bags Pouches for IV solutions
The customer should be aware that Bormed products may only be used in applications which are pre-approved for evaluation by Borealis received in the form of a risk assessment form (RAF) review response. Without such preapproval, no use of the grade shall be made. In case of doubt, the customer should seek pre-approval for evaluation from Borealis to proceed through their Sales or technical contact. Borealis makes no warranties beyond what is contained in this product datasheet and the customer is responsible for reading and accepting the disclaimer as contained in this product datasheet.
Additives
Bormed RE816CF contains antiblock but no slip agent
Special Features
Good optical properties Good impact strength High water vapour barrier Sterilisability by means of water steam
基本信息
| 原厂资料 | 物性表-ISO(英文) | |||
| 产品特性 | 良好冲击性良好光学性医疗级耐蒸煮 | |||
| 添加助剂 | 开口剂 | |||
| 成型方式 | 薄膜挤出 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 11 g/10min | ISO 1133 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
弯曲模量 | 800 Mpa | ISO 178 | |
摩擦系数 | 0.5 - | ISO 8295 | Film/Film |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
熔融温度(Tm) | 145 °C | ISO 11357-3 | DSC |
| 光学性能 | 值/单位 | 测试标准 | 测试条件 |
雾度 | 2 % | ASTM D1003 | |
光泽度 | 120 - | ASTM D 2457 | 20 degree |
| 薄膜性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
- | 35 Mpa | ISO 527-3 | MD |
- | 30 Mpa | ISO 527-3 | TD |
拉伸延伸率 | |||
断裂(brk) | 600 % | ISO 527-3 | MD |
断裂(brk) | 600 % | ISO 527-3 | TD |
拉伸模量 | 450 Mpa | ISO 527-3 | MD |
拉伸模量 | 450 Mpa | ISO 527-3 | TD |
落锤冲击 | 20 J/mm | ISO 7765-2 |
原材料现货供应:133-8218-6680(微信同号)