Bormed™ HD850MO
PP(聚丙烯)
博禄/北欧化工(Borealis AG/Borouge)
产品描述
Bormed HD850MO is a polypropylene homopolymer intended for evaluation for use in Healthcare applications. This medium melt flow grade gives exceptional good dimensional stability to final products, especially at higher temperatures.
The fast crystallisation and its high crystallisation temperature give possibilities for the reduction in cycle time. Material can be sterilised with vapour (121°C for 20 min) or EtO.
CAS-No. 9003-07-0
Applications
Bormed HD850MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical and Diagnostic devices or Pharmaceutical packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HD850MO .
Dosing units Aerosol devices Filter housings for Haemodialysis Pharmaceutical & diagnostic packaging in solid dose form or for oral and/or topical administration Caps Closures Bottles & Boxes as Packaging for pharmaceutical & diagnostic products
The customer should be aware that Bormed products may only be used in applications which are pre-approved for evaluation by Borealis received in the form of a risk assessment form (RAF) review response. Without such preapproval, no use of the grade shall be made. In case of doubt, the customer should seek pre-approval for evaluation from Borealis to proceed through their Sales or technical contact. Borealis makes no warranties beyond what is contained in this product datasheet and the customer is responsible for reading and accepting the disclaimer as contained in this product datasheet.
Special Features
High stiffness Medical compliance Dimensional stability also in autoclave Low extractables
基本信息
| 原厂资料 | 物性表-ISO(英文) | |||
| 产品特性 | 高刚性耐热尺寸稳定短周期成型医疗级环氧乙烷灭菌(EtO)耐蒸煮均聚物 | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
熔体质量流动速率(MFR) | |||
230°C/2.16 kg | 8 g/10min | ISO 1133 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 38 Mpa | ISO 527-2 | 50 mm/min |
拉伸延伸率 | |||
屈服(yld) | 7.5 % | ISO 527-2 | 50 mm/min |
弯曲模量 | 1850 Mpa | ISO 178 | |
拉伸模量 | 1800 Mpa | ISO 527-2 | 1 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
23℃ (73℉) | 3 kJ/m² | ISO 179/1eA | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 112 °C | ISO 75-2 | |
熔融温度(Tm) | 162 °C | ISO 11357-3 | DSC |
原材料现货供应:133-8218-6680(微信同号)