Arlon® 1000
PEEK(聚醚醚酮)
Greene Tweed
产品描述
Primary Industry
-Aerospace
-Energy Upstream
-Energy Downstream
-Semiconductor
Description/Primary Uses
• Virgin PEEK
• Sealing components
• Back-up rings, wear rings, and bushings
• CMP retainer rings
• Guides
• Slides
• Engine build-up components (brackets, cable clamps)
• Retainers
• Valve components
• Thermal/electrical insulators
• Transformer housings
• Radomes
• Vanes
• Wafer handling robot end effector pads
Features & Benefits
• Used for non-pressure-rated contact blocks
• Meets MIL-P-46183, Type 1
• Low extractables
• Good dimensional stability
• Good wear properties
• Excellent fire properties (low smoke/flammability, self-extinguishing)
• Good toughness/impact performance
• Service temperature range: -65°F (-54°C) to +500°F (260°C)
• Excellent chemical capability; excellent chemical resistance to all aerospace fluids
• Certified to ISO 23936/NORSOK M-710 for high sour fluid aging
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 耐热阻燃耐磨尺寸稳定低烟浓度耐化学性耐酸低萃取物 | |||
| 法规认证 | MIL P-46183(美国军用标准) | |||
| 颜色形状 | 粒状褐色 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 1.3 g/cm³ | ASTM D792 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 107.6 Mpa | ASTM D638 | |
断裂(brk) | 96.5 Mpa | ASTM D638 | |
拉伸延伸率 | |||
- | 35 % | ASTM D 638 | |
弯曲强度 | |||
- | 174.4 Mpa | ASTM D790 | |
弯曲模量 | 4136.9 Mpa | ASTM D790 | 0.5% Secant |
拉伸模量 | 4240.3 Mpa | ASTM D638 | 0.5% Secant |
摩擦系数 | 0.29 - | ASTM G77 | PV=2250.1 kg/cm |
磨损因数 | 52 E-10 in3·min/ft·lb·hr | ASTM G77 | |
剪切强度 | 85.5 Mpa | ASTM D 732 | Axial |
剪切强度 | 85.5 Mpa | ASTM D 732 | Transverse |
抗压强度 | 131 Mpa | ASTM D 695 | Break |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
洛氏硬度 M | 104 M | ASTM D 785 | |
邵氏硬度 D | 88 D | ASTM D 2240 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | 177 °C | ASTM D648 | |
线性膨胀系数(CLTE) | |||
- | 135 E-6 cm/cm/℃ | ASTM E228 | Above 149°C |
- | 46.8 E-6 cm/cm/℃ | ASTM E228 | Below 149°C |
负载形变 | 0.09 % | ASTM D621 |