Arlon® 1163
PEEK(聚醚醚酮)
Greene Tweed
产品描述
Primary Industry
-Aerospace
Description/Primary Uses
• Glass-reinforced PEEK
• Higher strength/stiffness than unreinforced Arlon®, with excellent electrical and thermal isolation performance
• Landing gear
• Utility actuation
• Engines
• Engine sensor housings, valve housings
• Engine build-up components (brackets, cable clamps)
• Electrical connectors
Features & Benefits
• Meets MIL-P-46183, Type II, Class 3
• Exceptional chemical and thermal resistance
• Excellent wear grade material
• Excellent fire properties (low smoke/flammability, self-extinguishing)
• Good toughness/impact performance
• Service temperature range: -65°F (-54°C) to +500°F (260°C)
• Excellent chemical resistance to all aerospace fluids
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 良好的刚性良好冲击性耐热保温隔热阻燃绝缘耐磨低烟浓度耐化学性填充增强 | |||
| 颜色形状 | 粒状褐色 | |||
| 成型方式 | 注塑 | |||
| 增强填充 | 玻纤 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 1.53 g/cm³ | ASTM D792 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
断裂(brk) | 186.2 Mpa | ASTM D638 | |
拉伸延伸率 | |||
- | 2.4 % | ASTM D 638 | |
弯曲强度 | |||
- | 262 Mpa | ASTM D790 | |
弯曲模量 | 10342 Mpa | ASTM D790 | 0.5% Secant |
拉伸模量 | 11859 Mpa | ASTM D638 | 0.5% Secant |
摩擦系数 | 0.24 - | ASTM G77 | PV = 12600 psi-ft/min |
磨损因数 | 175 E-10 in3·min/ft·lb·hr | ASTM G77 | |
剪切强度 | 105.5 Mpa | ASTM D 732 | Axial |
剪切强度 | 80.7 Mpa | ASTM D 732 | Transverse |
抗压强度 | 241.3 Mpa | ASTM D 695 | Break |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
洛氏硬度 M | 107 M | ASTM D 785 | |
邵氏硬度 D | 90 D | ASTM D 2240 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | 315.6 °C | ASTM D648 | |
线性膨胀系数(CLTE) | |||
- | 45 E-6 cm/cm/℃ | ASTM E228 | Above 149°C |
- | 25 E-6 cm/cm/℃ | ASTM E228 | Below 149°C |
负载形变 | 0.08 % | ASTM D621 |