EMERGE™ PC 8600ECO-10
PC(聚碳酸酯)
盛禧奥(TRINSEO)
产品描述
EMERGE™ PC 8600ECO-10 Advanced Resin contains 50% post consumer recycled (PCR) polycarbonate complying with IEEE 1680:2006 certified by TÜV Rheinland. It is a translucent and ignition resistant polycarbonate that does not contain chlorine, bromine, or phosphate additives to comply with global environmental standards. This resin combines good mechanical, thermal, and chemical properties while retaining excellent processability.
Applications
Electronics and electrical appliances
Charges and adaptors enclosures
Information technology equipment
基本信息
| 原厂资料 | 物性表-ASTM(英文) | |||
| 产品特性 | 阻燃无氯无溴无红磷含回收料 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 1.2 g/cm³ | ASTM D792 | |
熔体质量流动速率(MFR) | |||
300℃/1.2 kg | 10 g/10min | ASTM D1238 | |
收缩率 | |||
纵向(Flow) | 0.5~0.7 % | ASTM D 955 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 61 Mpa | ASTM D638 | 3.20 mm,Injection Molded |
断裂(brk) | 66 Mpa | ASTM D638 | 3.20 mm,Injection Molded |
拉伸延伸率 | |||
屈服(yld) | 5 % | ASTM D638 | 3.20 mm,Injection Molded |
断裂(brk) | 120 % | ASTM D638 | 3.20 mm,Injection Molded |
拉伸模量 | 2800 Mpa | ASTM D638 | 3.20 mm,Injection Molded |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
悬臂梁缺口(Izod Notched) | |||
23℃ (73℉) | 810 J/m | ASTM D256 | 3.20 mm,Injection Molded |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | 127 °C | ASTM D648 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | 125 °C | ISO 75-2/A | Unannealed |
维卡软化温度(Vicat) | 149 °C | ASTM D1525 | Rate B (120°C/h), Loading 1 (10 N) |
维卡软化温度(Vicat) | 150 °C | ISO 306 | A120 |
相对温度指数(RTI) | |||
冲击w/impact,- | 125 °C | UL 746 | |
电气Elec,- | 125 °C | UL 746 | |
强度w/o impact,- | 125 °C | UL 746 | |
球压痕温度 | 125 °C | IEC 60335-1 | |
| 燃烧性能 | 值/单位 | 测试标准 | 测试条件 |
UL 防火等级 | |||
V-2 | 0.55 mm | UL94 | |
V-0 | 1.5 mm | UL94 | |
V-0 | 2.5 mm | UL94 |