LNP™ STAT-KON™ DX13320C
PC(聚碳酸酯)
沙特基础 (SABIC)
产品描述
LNPTM Stat-KonTM DX13320C is an electrical conductive thermoplastic compound featuring electrostatic discharge (ESD) safe performance based on a unique Ultra Clean Polycarbonate (PC) resin reinforced with 20% carbon fiber. This compound provides good stiffness, dimension stability and has extremely high level of cleanliness for the most demanding applications in the Hard Disk Drive and Semiconductor industry. A unique feature of this material is its low C18-C40 hydrocarbons and this compound is manufactured using the LNP Clean Compounding Solution (CCS) technology
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 高刚性导电EMI/RFI ESD尺寸稳定填充增强 | |||
| 增强填充 | 20% 碳纤 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
比重 | 1.26 - | ASTM D792 | |
熔体体积流动速率(MVR) | |||
300°C/5.0 kg | 34 cm³/10 min | ISO 1133 | |
收缩率 | |||
纵向(Flow) | 0.1~0.2 % | Internal | flow, 3.2 m |
横向(Across Flow) | 0.2~0.4 % | Internal | xflow, 3.2 mm |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
断裂(brk) | 150 Mpa | ISO 527 | 5 mm/min |
断裂(brk) | 152 Mpa | ASTM D638 | Type I, 5 mm/min |
拉伸延伸率 | |||
断裂(brk) | 2 % | ASTM D638 | Type I, 5 mm/min |
断裂(brk) | 1.9 % | ISO 527 | 5 mm/min |
弯曲强度 | |||
屈服(yld) | 187 Mpa | ISO 178 | 2 mm/min |
- | 209 Mpa | ASTM D790 | |
弯曲模量 | 11500 Mpa | ASTM D790 | 1.3 mm/min, 50 mm span |
弯曲模量 | 11600 Mpa | ISO 178 | 2 mm/min |
拉伸模量 | 15170 Mpa | ASTM D638 | 5 mm/min |
拉伸模量 | 14590 Mpa | ISO 527 | 1 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
23℃ (73℉) | 7 kJ/m² | ISO 179/2C | |
简支梁无缺口(Charpy Unnotched) | |||
23℃ (73℉) | 28 kJ/m² | ISO 179/2C | |
悬臂梁缺口(Izod Notched) | |||
23℃ (73℉) | 70 J/m | ASTM D256 | |
悬臂梁无缺口(Izod Unnotched) | |||
23℃ (73℉) | 410 J/m | ASTM D4812 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | 117 °C | ASTM D648 | 3.2 mm, unannealed |
线性膨胀系数(CLTE) | |||
纵向(Flow) | 9.2 E-6/°C | ASTM E831 | -40°C to 40°C, flow |
横向(Across Flow) | 79.7 E-6/°C | ASTM E831 | -40°C to 40°C, xflow |
| 电学性能 | 值/单位 | 测试标准 | 测试条件 |
体积电阻率 | 5E+3~5E+3 Ohm-cm | ASTM D257 | |
表面电阻率 | 5E+3~5E+5 Ohm | ASTM D257 |