EMERGE™ PC 4330-22
PC(聚碳酸酯)
盛禧奥(TRINSEO)
产品描述
EMERGE™ 4330-22 Advanced Resin is a high-performance polycarbonate resin offering ultraviolet light stability, high heat resistance, toughness, and superior flow. This resin is available in a full range of colors that can be custom tailored to meet your product requirements.
Applications:
Consumer Electronics and Information Technology Equipment
Computer and Electronic Equipment
Portable Electronics
基本信息
| 原厂资料 | 物性表-ASTM(英文) | |||
| 产品特性 | 高韧性耐热抗紫外线高流动 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 1.2 g/cm³ | ASTM D792 | |
熔体质量流动速率(MFR) | |||
300℃/1.2 kg | 22 g/10min | ASTM D1238 | |
收缩率 | |||
纵向(Flow) | 0.5~0.7 % | ASTM D 955 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 60 Mpa | ASTM D638 | 3.20 mm,Injection Molded |
断裂(brk) | 65.5 Mpa | ASTM D638 | 3.20 mm,Injection Molded |
拉伸延伸率 | |||
断裂(brk) | 120 % | ASTM D638 | 3.20 mm,Injection Molded |
弯曲强度 | |||
- | 96.5 Mpa | ASTM D790 | 3.20 mm,Injection Molded |
弯曲模量 | 2410 Mpa | ASTM D790 | 3.20 mm,Injection Molded |
拉伸模量 | 2340 Mpa | ASTM D638 | 3.20 mm,Injection Molded |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
悬臂梁缺口(Izod Notched) | |||
23℃ (73℉) | 750 J/m | ASTM D256 | 3.20 mm,Injection Molded |
悬臂梁无缺口(Izod Unnotched) | |||
23℃ (73℉) | NB J/m | ASTM D256 | 3.20 mm,Injection Molded |
仪器化落镖冲击能量 | |||
23℃ (73℉)总能量 | 72.3 J | ASTM D3763 | 3.20 mm,3.39 m/sec |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
洛氏硬度R | 118 R | ASTM D785 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 142 °C | ASTM D648 | 3.99 mm,Annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | 139 °C | ASTM D648 | 3.99 mm,Annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | 126 °C | ASTM D648 | 3.99 mm,Unannealed |
维卡软化温度(Vicat) | 148 °C | ASTM D1525 | Rate A (50°C/h), Loading 2 (50 N) |
线性膨胀系数(CLTE) | |||
纵向(Flow) | 68 E-6 cm/cm/℃ | ASTM D 696 | -40 to 80°C |
| 燃烧性能 | 值/单位 | 测试标准 | 测试条件 |
UL 防火等级 | |||
HB | 1.6 mm | UL94 | |
HB | 3.2 mm | UL94 | |
氧指数(LOI) | 26 % | ASTM D 2863 | |
| 电学性能 | 值/单位 | 测试标准 | 测试条件 |
体积电阻率 | 2.0E+17 Ohm-cm | ASTM D257 | |
介电常数(DK) | |||
60 Hz | 3 - | ASTM D 150 | |
1MHz | 3 - | ASTM D 150 | |
耗散因数(DF) | |||
60 Hz | 10 E-4 | ASTM D 150 | |
1MHz | 20 E-4 | ASTM D150 | |
绝缘强度 | 17 kV/mm | ASTM D149 |