TECHNYL® A 219E1 V33 BLACK
TECHNYL® A 219E1 V33 BLACK
PA66
道默化学(DOMO Chemicals)
产品描述
TECHNYL® A 219E1 V33 Black (Technyl XA 1687 Black) is a polyamide PA66 reinforced with 33% of glass fibre, organic heat stabilized, for injection moulding. This grade offers an excellent combination between thermal and mechanical properties. This grade offers a formula clean from additive that contain halogen and other sustances (ex: phosphorus) that can migrate and generate corrosion issues. < 100ppm halogen content garanteed, based on internal elution analysis.Electrofriendly heat satbilized grade. Suitable for laser printing. (PROVISIONAL DATA SHEET: The results shown will be further updated as more industrial lots will be produced.)
基本信息
| 原厂资料 | 物性表(英文) |
| 产品特性 | 热稳定印刷/标记高流动填充增强 |
| 添加助剂 | 热稳定剂 |
| 法规认证 | REACH (EC 1907/2006)RoHS(欧盟电子电气设备中有害物质) |
| 颜色形状 | 粒状黑色 |
| 成型方式 | 注塑 |
| 增强填充 | 33% 玻纤 |
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
密度 | 1.4 g/cm³
| ISO 1183 | |
收缩率 | | | |
纵向(Flow) |
0.28 % | ISO 294-4, 2577 | 72 hr, 23°C, 50% RH |
横向(Across Flow) |
0.98 % | ISO 294-4, 2577 | 72 hr, 23°C, 50% RH |
吸水率 | 0.78 %
| ISO 62 | 24 hr, 23°C |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | | | |
断裂(brk) |
200 Mpa | ISO 527-1/-2 | Dry. |
拉伸延伸率 | | | |
断裂(brk) |
2.8 % | ISO 527-1/-2 | Dry. |
弯曲强度 | | | |
- |
270 Mpa | ASTM D790 | Dry. 2 mm/min |
- |
190 Mpa | ISO 178 | Dry. 2 mm/min |
弯曲模量 | 10600 Mpa
| ASTM D790 | Dry. 2 mm/min |
弯曲模量 | 9200 Mpa
| ISO 178 | Dry. 2 mm/min |
拉伸模量 | 11000 Mpa
| ISO 527-1/-2 | Dry. 1 mm/min |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | | | |
23℃ (73℉) |
13 kJ/m² | ISO 179/1eA | Dry |
简支梁无缺口(Charpy Unnotched) | | | |
23℃ (73℉) |
70 kJ/m² | ISO 179/1eU | Dry |
悬臂梁缺口(Izod Notched) | | | |
23℃ (73℉) |
12 kJ/m² | ISO 180/1A | Dry |
悬臂梁无缺口(Izod Unnotched) | | | |
23℃ (73℉) |
65 kJ/m² | ISO 180/1U | Dry |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | | | |
1.8 Mpa (264 psi)（18.6kg/cm²） |
255 °C | ISO 75 | |
熔融温度(Tm) | 263 °C
| ISO 11357-1 | 10°C/min |
加工温度 | 270~290 °C
| - | |
模具温度 | 70~100 °C
| - | |
