Ultramid® A3EG7 FC Aqua BK23285
PA66
巴斯夫 (BASF)
产品描述
Ultramid® A3EG7FC Aqua black 23285 is optimized for plastic parts, mandatory requiring material approvals for drinking water or direct food contact
The product is approved according to
• 21 CFR FDA § 177.1500 "Nylon resins" (for repeated use applications only)
• 21 CFR FDA § 178.3297 "Colorants for polymers” (for repeated use applications only)
• European Food Contact European Food Contact Commission Regulation (EU) 10/2011
• GMP (EC) n°2023/2006
and provides the approvals for drinking water regulations of
• KTW
• DVGW W270
• WRAS
• ACS (disclosure of ingredients)
• NSF (disclosure of ingredients)
For questions regarding the compliance with further regulations, and certificates, please contact your local BASF representative or Plastics Safety (E-Mail: plastics.safety@basf.com).
基本信息
原厂资料 | 物性表(英文) | |||
产品特性 | 食品接触级饮用水级填充增强 | |||
法规认证 | ACS(法国卫生认证)DVGW W270(德国饮用水)EU Food Contact(2011/10/EC)(欧盟食品级)FDA(食品药品监督管理局)KTW(德国饮用水)NSF(美国卫生基金会食品认证)WRAS(英国饮用水) | |||
颜色形状 | 粒状黑色 | |||
成型方式 | 注塑 | |||
增强填充 | 35% 玻纤 |
技术参数
物理性能 | 值/单位 | 测试标准 | 测试条件 |
---|---|---|---|
密度 | 1.41 g/cm³ | ISO 1183 | |
熔体体积流动速率(MVR) | |||
275°C/5 kg | 30 cm³/10 min | ISO 1133 | |
收缩率 | |||
纵向(Flow) | 0.36 % | ISO 294-4 | |
横向(Across Flow) | 0.99 % | ISO 294-4 | |
- | 0.51 % | Internal | constrained |
吸水率 | 4.7~5.3 % | ISO 62 | saturation in water at 23°C |
吸湿率 | 1.4~1.8 % | ISO 62 | equilibrium 23°C/50% r.h. |
粘度 | 145 cm³/g | ISO 307, 1157, 1628 | 0.5% in 96% H2SO4 |
机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
断裂(brk) | 150 Mpa | ISO 527-1/-2 | Cond. |
断裂(brk) | 210 Mpa | ISO 527-1/-2 | Dry |
拉伸延伸率 | |||
断裂(brk) | 5 % | ISO 527-1/-2 | Cond. |
断裂(brk) | 3 % | ISO 527-1/-2 | Dry |
弯曲强度 | |||
- | 240 Mpa | ISO 178 | Cond. |
- | 300 Mpa | ISO 178 | Dry |
弯曲模量 | 8000 Mpa | ISO 178 | Cond. |
弯曲模量 | 10000 Mpa | ISO 178 | Dry |
拉伸模量 | 8500 Mpa | ISO 527-1/-2 | Cond. |
拉伸模量 | 11500 Mpa | ISO 527-1/-2 | Dry |
拉伸蠕变模量 | |||
1000h | 6650 Mpa | ISO 899-1 | Cond., strain ≤ 0.5%, 23°C |
冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
-30℃ (-22℉) | 12 kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | 22 kJ/m² | ISO 179/1eA | Cond. |
23℃ (73℉) | 14 kJ/m² | ISO 179/1eA | Dry |
简支梁无缺口(Charpy Unnotched) | |||
-30℃ (-22℉) | 75 kJ/m² | ISO 179/1eU | Dry |
23℃ (73℉) | 105 kJ/m² | ISO 179/1eU | Cond. |
23℃ (73℉) | 95 kJ/m² | ISO 179/1eU | Dry |
悬臂梁缺口(Izod Notched) | |||
23℃ (73℉) | 18 kJ/m² | ISO 180/A | Cond. |
23℃ (73℉) | 14 kJ/m² | ISO 180/A | Dry |
热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)(4.6kg/cm²) | 250 °C | ISO 75-1/-2 | |
1.8 Mpa (264 psi)(18.6kg/cm²) | 250 °C | ISO 75-1/-2 | |
比热容 | 1500 J/kg-K | - | |
线性膨胀系数(CLTE) | |||
纵向(Flow) | 15~20 E-6/K | ISO 11359-1/-2 | (23-55)°C |
横向(Across Flow) | 60~70 E-6/K | ISO 11359-1/-2 | (23-55)°C |
熔融温度(Tm) | 260 °C | ISO 11357-1/-3 | DSC |
导热系数 | 0.35 W/(m K) | DIN 52612-1 | |
短周期使用温度 | 240 °C | - | |
加工温度 | 280~300 °C | - | Injection moulding/Extrusion |
加工温度 | 290 °C | - | recommended, injection molding |
模具温度 | 80~90 °C | - | Injection moulding |
模具温度 | 80 °C | - | recommended, injection molding |
温度指数(TI)-拉伸强度 | |||
5000 h | 165 °C | IEC 60216 | 50% loss of tensile strength |
20000 h | 135 °C | IEC 60216 | 50% loss of tensile strength |
燃烧性能 | 值/单位 | 测试标准 | 测试条件 |
UL 防火等级 | |||
HB | 0.8 mm | IEC 60695-11-10 | |
HB | 1.57 mm | IEC 60695-11-10 | |
氧指数(LOI) | 24 % | ISO 4589-1/-2 | |
FMVSS | + pass | FMVSS 302 | Thickness ≥ 1 mm |
燃烧速率 | + mm/min | ISO 3795 | Thickness ≥ 1 mm |
电学性能 | 值/单位 | 测试标准 | 测试条件 |
体积电阻率 | 1.0E+10 Ohm-m | IEC 62631-3-1 | Cond. |
体积电阻率 | 1.0E+13 Ohm-m | IEC 62631-3-1 | Dry |
表面电阻率 | 1.0E+10 Ohm | IEC 62631-3-2 | Cond. |
表面电阻率 | 1.0E+12 Ohm | IEC 62631-3-2 | Dry |
介电常数(DK) | |||
1MHz | 5.7 - | IEC 62631-2-1 | Cond. |
1MHz | 3.5 - | IEC 62631-2-1 | Dry |
耗散因数(DF) | |||
100Hz | 3000 E-4 | IEC 62631-2-1 | Cond. |
100Hz | 200 E-4 | IEC 62631-2-1 | Dry |
1MHz | 1500 E-4 | IEC 62631-2-1 | Cond. |
1MHz | 200 E-4 | IEC 62631-2-1 | Dry |
相比漏电起痕指数(CTI ) | |||
溶液A | 550 V | IEC 60112 | Cond. |
绝缘强度 | 80 kV/mm | IEC 60243-1 | Cond., K20/P50, d = 0.6 - 0.8 mm |
绝缘强度 | 37 kV/mm | IEC 60243-1 | Cond.,K20/K20, (60*60*1 mm³) |
绝缘强度 | 39 kV/mm | IEC 60243-1 | Dry, K20/K20, (60*60*1 mm³) |
绝缘强度 | 90 kV/mm | IEC 60243-1 | Dry, K20/P50, d = 0.6 - 0.8 mm |