TROGAMID® T-GF35
PA (尼龙-聚酰胺)
赢创(原德固赛)(Evonik)
产品描述
Glass fiber-reinforced amorphous polyamide with high rigidity and low shrinkage and warpage
TROGAMID® T-GF35 is reinforced with 35% glass fibers and based on TROGAMID® T5000 for injection molding of rigid, low distortion moldings.
TROGAMID® T-GF35 can be mixed with TROGAMID® T5000 at any ratio and can be mixed therefore allows the manufacturing of moldings with a lower glass fiber content. The glass fiber content can be adjusted to the property level required for your special applications.
Compared to TROGAMID® T5000 the glass fiber-reinforced TROGAMID® T-GF35 shows an even better mechanical strength and rigidity. In contrast to glass fiber-reinforced PA 6 or PA 66 the properties of TROGAMID® T-GF35 are virtually unaffected by water absorption.
Depending on the glass fiber content and the wall thickness of the molding translucent parts can be produced. TROGAMID® T-GF35 is supplied as cylindrical pellets in moisture-proof packaging, ready for processing.
Industrial Sector
Instustry and Building Construction
Processing
Injection Molding
Special Characteristics
Translucent, High impact strength or impact modified
Features
Amorphous, Low Warpage
Color
Natural Color
Delivery form
Pellets, Granules
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 高强度高刚性高冲击低翘曲填充增强 | |||
| 添加助剂 | 抗冲击剂 | |||
| 颜色形状 | 粒状半透明 | |||
| 成型方式 | 注塑 | |||
| 增强填充 | 35% 玻纤 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 1.4 g/cm³ | ISO 1183 | dry |
熔体体积流动速率(MVR) | |||
300°C/5.0 kg | 9 cm³/10 min | ISO 1133 | dry |
收缩率 | |||
纵向(Flow) | 0 % | ISO 294-4, 2577 | dry |
横向(Across Flow) | 0.4 % | ISO 294-4, 2577 | dry |
吸水率 | 5 % | ISO 62 | dry |
熔体密度 | 1290 g/cm³ | - | dry, melt |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
断裂(brk) | 180 Mpa | ISO 527 | dry |
拉伸延伸率 | |||
断裂(brk) | 3 % | ISO 527 | dry |
弯曲模量 | 12000 Mpa | ISO 178 | dry, 23°C |
拉伸模量 | 10000 Mpa | ISO 527 | dry |
拉伸蠕变模量 | |||
1h | 10000 Mpa | ISO 899-1 | cond., 0,5% Strain |
1000h | 8300 Mpa | ISO 899-1 | cond., 0,5% Strain |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
简支梁缺口(Charpy Notched) | |||
-30℃ (-22℉) | 8 kJ/m² | ISO 179/1eA | dry |
0℃ (32℉) | 10 kJ/m² | ISO 179/1eA | dry |
23℃ (73℉) | 11 kJ/m² | ISO 179/1eA | dry |
简支梁无缺口(Charpy Unnotched) | |||
-30℃ (-22℉) | 59 kJ/m² | ISO 179/1eU | dry |
0℃ (32℉) | 70 kJ/m² | ISO 179/1eU | dry |
23℃ (73℉) | 77 kJ/m² | ISO 179/1eU | dry |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 D | 89 D | ISO 7619-1 | dry, 3s |
球压硬度 | 200 Mpa | ISO 2039-1 | dry |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 150 °C | ISO 75-1/-2 | dry |
1.8 Mpa (264 psi)（18.6kg/cm²） | 140 °C | ISO 75-1/-2 | dry |
维卡软化温度(Vicat) | 158 °C | ISO 306 | dry, 10 N, 50 K/h |
维卡软化温度(Vicat) | 151 °C | ISO 306 | dry, 50 N, 50 K/h |
比热容 | 1820 J/kg-K | - | dry, melt |
线性膨胀系数(CLTE) | |||
纵向(Flow) | 32 E-6/K | ISO 11359-1/-2 | dry, 23°C to 55 °C |
横向(Across Flow) | 30 E-6/K | ISO 11359-1/-2 | dry, 23°C to 55 °C |
玻璃化温度(Tg) | 150 °C | ISO 11357-1/-2 | dry, 20°C/min |
导热系数 | 0.25 W/(m K) | - | dry, melt |
加工温度 | 130 °C | - | dry, Ejection |
| 燃烧性能 | 值/单位 | 测试标准 | 测试条件 |
UL 防火等级 | |||
HB | 0.8 mm | IEC 60695-11-10 | dry |
HB | 1.6 mm | IEC 60695-11-10 | dry |
| 电学性能 | 值/单位 | 测试标准 | 测试条件 |
体积电阻率 | 1.0E+13 Ohm-m | IEC 62631-3-1 | dry |
表面电阻率 | 1.0E+15 Ohm | IEC 62631-3-2 | cond. |
表面电阻率 | 1.0E+14 Ohm | IEC 62631-3-2 | dry, A |
表面电阻率 | 1.0E+13 Ohm | IEC 62631-3-2 | dry, RSA |
表面电阻率 | 1.0E+13 Ohm | IEC 62631-3-2 | dry, RSD |
介电常数(DK) | |||
100Hz | 5 - | IEC 62631-2-1 | dry |
1MHz | 3.8 - | IEC 62631-2-1 | dry |
耗散因数(DF) | |||
100Hz | 180 E-4 | IEC 62631-2-1 | dry |
1MHz | 240 E-4 | IEC 62631-2-1 | dry |
相比漏电起痕指数(CTI ) | |||
溶液A | 550 V | IEC 60112 | dry, 100 drops value |
溶液A | 575 V | IEC 60112 | dry, 50 drops value |
绝缘强度 | 35 kV/mm | IEC 60243-1 | dry, S20/P50 |