DOWLEX™ IP 20
LLDPE
陶氏化学(Dow Chemical)
产品描述
DOWLEX IP 20 Polyethylene Resin is a Linear Low Density Polyethylene produced at Dow and it is intended for injection molding applications. This resin presents superior properties compared to a Polyethylene of similar melt index and density. Its main characteristics are: high stiffness, good resistance at low temperatures, exceptional gloss and reduced warp in large pieces
Main Applications:
Injection Molded parts
Food ware and house ware
Toys
Boxes and trays
Caps and lids
Carrier resin for compounding (masterbatches)
Complies with:
U.S. FDA 21 CFR 177.1520(c )3.2a
Europe Commission Regulation (EU) No 10/2011
Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12.
Consult the regulations for complete details.
基本信息
| 原厂资料 | 物性表(英文) | |||
| 法规认证 | EU Food Contact(2011/10/EC)(欧盟食品级)FDA(食品药品监督管理局)MERCOSUR(拉美市场法规) | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.926 g/cm³ | ASTM D792 | |
密度 | 0.926 g/cm³ | Internal | Base Density |
熔体质量流动速率(MFR) | |||
190℃/2.16 kg | 20 g/10min | ASTM D1238 | |
环境应力开裂(ESCR ) | 8 Hours | ASTM D 1693 | 50°C, 100% Igepal, F50 |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 15 Mpa | ASTM D638 | |
断裂(brk) | 9 Mpa | ASTM D638 | |
拉伸延伸率 | |||
断裂(brk) | 130 % | ASTM D638 | |
弯曲模量 | 528 Mpa | ASTM D790 | |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 D | 63 D | ASTM D 2240 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
加工温度 | 190~230 °C | - | |
模具温度 | 5~30 °C | - |
原材料现货供应: