DOW™ LLDPE DNDB-7441 NT 7
LLDPE
陶氏化学(Dow Chemical)
产品描述
DOW DNDB-7441 NT 7 Linear Low Density Polyethylene Resin is produced using UNIPOL™ process technology. It is intended for use in hose and tube applications. It also has utility in gasketing, spiral wound hose, and corrugated hose applications. It exhibits good draw down, excellent resistance to melt fracture, low temperature toughness, uniform matte surface finish, and exceptional flex life. It has a modulus (stiffness) that is 50% higher than that of a conventional high pressure, low density polyethylene resin of equal density. It is especially well suited for profile extrusions where stress cracking resistance, flexural wear resistance, and ease of extrusion are important. It is also recommended as a modifier in blends with flexible copolymers such as ethylene ethyl acetate (EVA) and ethylene ethyl acrylate (EAA) to enhance their rigidity in extrusion applications.
Industrial Standards Compliance:
ASTM D 3350: cell classification PE123110A
Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a
Complies with EU, No 10/2011
Consult the regulations for complete details.
基本信息
原厂资料 | 物性表-ASTM(英文) | |||
法规认证 | ASTM D3350(聚乙烯塑料管和配件材料标准)EU Food Contact(2011/10/EC)(欧盟食品级)FDA(食品药品监督管理局) | |||
成型方式 | 挤出型材挤出管材挤出共混改性 |
技术参数
物理性能 | 值/单位 | 测试标准 | 测试条件 |
---|---|---|---|
密度 | 0.918 g/cm³ | ASTM D792 | |
熔体质量流动速率(MFR) | |||
190℃/2.16 kg | 0.6 g/10min | ASTM D1238 | |
190℃/21.6 kg | 44 g/10 min | ASTM D 1238 | |
环境应力开裂(ESCR ) | 500 Hours | ASTM D 1693 | F0, Compression molded |
机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 11 Mpa | ASTM D638 | Compression molded |
断裂(brk) | 15.5 Mpa | ASTM D638 | Compression molded |
拉伸延伸率 | |||
断裂(brk) | 800 % | ASTM D638 | Compression molded |
弯曲模量 | 310 Mpa | ASTM D790 | Compression molded |
冲击性能 | 值/单位 | 测试标准 | 测试条件 |
脆化温度 | -100 °C | ASTM D 746 | Compression molded |
硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 D | 44 D | ASTM D 2240 | Compression molded |
热学性能 | 值/单位 | 测试标准 | 测试条件 |
加工温度 | 196~221 °C | - | Extrusion |
原材料现货供应: