Formolene® HB5502Z
HDPE
台塑美国(Formosa Plastics)
产品描述
High Density Polyethylene (HDPE) Resin Contains a Mold Release Additive for Injection Blow Molding Applications
Formolene® HB5502Z eliminates the need for including a mold release agent at each machine, by incorporating zinc stearate with the resin. This incorporation assures uniform consistent releasing properties. It may be used as an injection blow molding resin.
Formolene® HB5502Z meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
Suggested Applications:
Injection Blow Molded… Pharmaceutical Packaging
基本信息
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 易脱模食品接触级 | |||
| 法规认证 | FDA(食品药品监督管理局) | |||
| 成型方式 | 注塑吹塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.955 g/cm³ | ASTM D 1505 | |
熔体质量流动速率(MFR) | |||
190℃/2.16 kg | 0.35 g/10min | ASTM D1238 | |
环境应力开裂(ESCR ) | 35 Hours | ASTM D 1693 | Condition B, 100% Igepal, F50 |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 28 Mpa | ASTM D638 | 50 mm/min |
拉伸延伸率 | |||
断裂(brk) | 600 % | ASTM D638 | 50 mm/min |
弯曲模量 | 1378 Mpa | ASTM D790 | |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
脆化温度 | -118 °C | ASTM D 746 |