EVERCAP™ DMDA-1241 NT 7
HDPE
陶氏化学(Dow Chemical)
产品描述
EVERCAP™ DMDA-1241 Experimental High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use as a polypropylene drop in replacement for a broad range of injection molding applications such as fitments, closures, and dispensing systems. This resin has been designed to provide an excellent balance of toughness, minimal shrinkage, balanced shrinkage, stiffness and processability.
Main Characteristics:
Drop in Replacement for Polypropylene Injection Molded Closures and Dispensing Systems
Excellent Impact Strength
Excellent Processing Characteristics
Complies with:
Complies with U.S. FDA 21 CFR 177.1520 (c)3.2a
EU, No 10/2011
Consult the regulations for complete details
基本信息
| 原厂资料 | 物性表-ASTM(英文) | |||
| 法规认证 | EU Food Contact(2011/10/EC)(欧盟食品级)FDA(食品药品监督管理局) | |||
| 成型方式 | 注塑 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.952 g/cm³ | ASTM D792 | |
熔体质量流动速率(MFR) | |||
190℃/2.16 kg | 16 g/10min | ASTM D1238 | |
环境应力开裂(ESCR ) | 10 Hours | ASTM D 1693 | 50°C, 100% Igepal, F50 |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 29 Mpa | ASTM D638 | |
断裂(brk) | 17.2 Mpa | ASTM D638 | |
拉伸延伸率 | |||
屈服(yld) | 7.2 % | ASTM D638 | |
断裂(brk) | 250 % | ASTM D638 | |
弯曲模量 | 1070 Mpa | ASTM D790 | 2% Secant |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 D | 64 D | ASTM D 2240 | |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
维卡软化温度(Vicat) | 124 °C | ASTM D1525 | |
熔融温度(Tm) | 130 °C | Internal | DSC |