EMERGE™ ABS 5302
ABS
盛禧奥(TRINSEO)
产品描述
EMERGE ABS 5302 is a black, 20% glass filled ABS which is suitable for use in a wide variety of internal structural component applications in the Information Technology market. This resin exhibits a property balance of flow, rigidity, and dimensional stability.
Applications:
Information Technology Equipment and consumer electronics
Printer internal components
Structural frames
基本信息
| 原厂资料 | 物性表-ASTM(英文) | |||
| 产品特性 | 高刚性尺寸稳定高流动填充增强 | |||
| 增强填充 | 20% 玻纤 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 1.19 g/cm³ | ASTM D792 | |
熔体质量流动速率(MFR) | |||
220℃/10 kg | 5 g/10 min | ASTM D 1238 | |
230°C/3.8 kg | 1.6 g/10 min | ASTM D 1238 | |
收缩率 | |||
纵向(Flow) | 0.15~0.25 % | ASTM D 955 | |
横向(Across Flow) | 0.35~0.4 % | ASTM D 955 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 70 Mpa | ASTM D638 | 3.20 mm,Injection Molded |
断裂(brk) | 70 Mpa | ASTM D638 | 3.20 mm,Injection Molded |
拉伸延伸率 | |||
屈服(yld) | 2 % | ASTM D638 | 3.20 mm,Injection Molded |
断裂(brk) | 2 % | ASTM D638 | 3.20 mm,Injection Molded |
弯曲强度 | |||
- | 114 Mpa | ASTM D790 | 3.20 mm,Injection Molded |
弯曲模量 | 6350 Mpa | ASTM D790 | 3.20 mm,Injection Molded |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
悬臂梁缺口(Izod Notched) | |||
23℃ (73℉) | 72 J/m | ASTM D256 | 3.20 mm,Injection Molded |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 105 °C | ASTM D648 | 3.20 mm,Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | 100 °C | ASTM D648 | 3.20 mm,Unannealed |
维卡软化温度(Vicat) | 106 °C | ASTM D1525 | Rate A (50°C/h), Loading 2 (50 N) |
维卡软化温度(Vicat) | 115 °C | ASTM D1525 | Rate B (120°C/h), Loading 1 (10 N) |
线性膨胀系数(CLTE) | |||
纵向(Flow) | 90 E-6 cm/cm/℃ | ASTM D 696 | -30 to 29°C |
横向(Across Flow) | 94 E-6 cm/cm/℃ | ASTM D 696 | -30 to 29°C |
| 燃烧性能 | 值/单位 | 测试标准 | 测试条件 |
UL 防火等级 | |||
HB | 1 mm | UL94 | BK, NC, GY |