MAGNUM™ 342 EZ
ABS
盛禧奥(TRINSEO)
产品描述
MAGNUM™ 342EZ is a standard heat ABS. It is a reliable and cost effective solution for general covered interior automotive applications. MAGNUM™ 342EZ has high flow characteristics supporting part design freedom.
Benefits:
Lot to lot consistency allowing for optimal machine parameters settings from the start
Low VOC allowing a better interior air quality facing increasing regulatory and OEMs constraints.
Heat stability during wide range of processing temperatures: enhanced part design freedom
Applications:
General purpose covered interior automotive applications
Mid-consoles
Door liners
Seat trims
基本信息
| 原厂资料 | 物性表-ASTM(英文) | |||
| 产品特性 | 耐热热稳定低挥发VOC高流动 | |||
技术参数
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 1.04 g/cm³ | ASTM D792 | |
熔体质量流动速率(MFR) | |||
230°C/3.8 kg | 6 g/10 min | ASTM D 1238 | |
收缩率 | |||
纵向(Flow) | 0.4~0.7 % | ASTM D 955 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
屈服(yld) | 41.4 Mpa | ASTM D638 | 3.20 mm,Injection Molded |
拉伸延伸率 | |||
屈服(yld) | 3 % | ASTM D638 | 3.20 mm,Injection Molded |
弯曲强度 | |||
- | 58.6 Mpa | ASTM D790 | 3.20 mm,Injection Molded |
弯曲模量 | 2000 Mpa | ASTM D790 | 3.20 mm,Injection Molded |
拉伸模量 | 1790 Mpa | ASTM D638 | 3.20 mm,Injection Molded |
| 冲击性能 | 值/单位 | 测试标准 | 测试条件 |
悬臂梁缺口(Izod Notched) | |||
-18℃ (0℉) | 80 J/m | ASTM D 256 | 3.20 mm,Injection Molded |
23℃ (73℉) | 160 J/m | ASTM D256 | 3.20 mm,Injection Molded |
仪器化落镖冲击能量 | |||
23℃ (73℉)峰值 | 32.8 J | ASTM D3763 | 3.20 mm,Injection Molded |
23℃ (73℉)总能量 | 42.9 J | ASTM D3763 | 3.20 mm,Injection Molded |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
热变形温度(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | 90.6 °C | ASTM D648 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | 76.7 °C | ASTM D648 | Unannealed |
维卡软化温度(Vicat) | 104 °C | ASTM D1525 | Rate B (120°C/h), Loading 1 (10 N) |